MAP Oil Tools

The MAPfrac® Circulation-Setting valve is a normally open valve located just above the float equipment but below the initiator valve. In the open position the valve allows fluid to be circulated through the casing string when needed during deployment into the wellbore. Once at setting depth, the valve is shifted closed with the use of a setting ball pumped down from the surface. This action closes off the internal circulation ports turning the valve into a virtual blanking plug which then allows for hydraulic activation of all tools in the casing string above. After tools are set, casing surface pressure can then be released leaving the tool string closed to the reservoir until the well is ready to be stimulated.

  • Ball activated closing
  • Remains closed after being shifted
  • Large ports for circulation and reduction of trash build up
  • Acts as blanking plug after closure
  • P110 material construction

Tech Sheet Part Number Carbide Option Wicker Option Boot PN Casing OD Casing WT Gage Ring Max Force lbs Max Set PSI Max Tensile Max OD Max PSI Max Set Max Tens Min ID Nip OD Nogo Bore Overshot PN Seal Bore Setting Range Min ID Setting Range Max ID Set Tool Size Stinger PN Tool ID Tool OD Threads Cup OD Working Pressure Exit Flow Area (in2) Open Pressuer Max (psi) Trigger Pressure (psi) Open Hole Setting Range (in) Max. Temperature Open Pressure (psi) Closing Pressure (psi) Max Pump Rate (BPM) Max Hydrostatic Opening Pressure (psi)
Login to view Tech Sheets 0201450250 4 1/2” 3.920 5.650 10,000 12.93 275
Login to view Tech Sheets 0200550200 5 12” 4.625 7.250 10,000 20.56 300